Introduction : Alan Electronic systems Pvt. Ltd., has developed Hi-tech AC-DC and DC-DC converters based on switch mode technology. The converters are designed to fulfill customer / user's expectation without compromising on quality and safety. There are basic two types of converters - Single type and Dual (Redundant) type.

TECHNICAL SPECIFICATIONS :

•  Input Voltage* : AC Range - 110 / 230 VAC, DC Range - 48 / 110 / 220 VDC (Custom built also available)
•  Output Voltage*: 24 VDC - 5, 7.5, 10 or 20 Amps. 48 VDC - 5, 7.5, or 10 Amps. (Custom built also available)
•  Ripple : Less than 1 % of rated output voltage
•  Line Regulation: Better than 0.5%
•  Load Regulation: Better than 1 %
•  Efficiency : Better than 80 % at full load.
•  Operating Temp: 0 - 55˚C
•  *Please clearly mention the INPUT and OUTPUT voltage at the time of ordering.

PROTECTIONS :

•  OVER VOLTAGE PROTECTION.
  Unit is protected from surge voltage, spikes and excessive Input voltage which exceeds the specified tolerance. In redundant type independent Input MCB and reverse protections are provided.
•  SHORT CIRCUIT PROTECTION.
  The Unit is fully protected from accidental Output short circuit.
•  OVER LOAD PROTECTION.
  The Unit is protected from over loading. During over load, Output current is limited by the Current limiting circuit which protects the Unit from damage. The Unit will resumes its original settings as soon as the normal condition is restored.